Enerpac ECCE26, Instruction Sheet

Page: 7 / 24

7
1
2
3
4
5
6
7
8
10
11
9
12
Figure 1, Features and Components
Key:
1. Safety Guard
2. Piston and Moving Blade
3. Trigger On-Off Switch
4. Grip/Handle
5. AC Power Cord
6. Electric Motor
7. Oil Reservoir
8. Piston Release Lever
9. Hydraulic Cylinder
10. Cutting Head
11. Fixed Blade
12. Storage Case
3.0 CONFORMANCE TO NATIONAL AND
INTERNATIONAL STANDARDS
Enerpac declares that this product has been
tested and conforms to applicable standards
and is compatible with all CE requirements.
A copy of an EU Declaration of Conformity is
enclosed with each shipment of this product.
4.0 DESCRIPTION
The Enerpac model ECCE26 is a fixed-head hydraulic
cutter designed to cut metal chains.
The cutter contains two blades, one fixed and one
moving. The moving blade is actuated by a hydraulic
cylinder.
Hydraulic force is provided by an AC powered electric
motor and an internal hydraulic pump. The pump
provides oil flow to the hydraulic cylinder, which
advances the cylinder piston and moving blade.
A hydraulic reservoir with built-in rubber diaphragm
provides a constant supply of oil to the pump, regardless
of tool orientation or the amount of piston extension.
A trigger style on-off switch, mounted on the cutter grip,
starts and stops the electric motor. The trigger must
remain pressed during the cutting process.
Moving the piston release lever retracts the piston after
cutting is completed.
See Figure 1 for a description of cutter major features
and components. Refer to Sections 2.1 through
2.4 of this manual for maximum cutting capacities,
specifications and dimensions.
5.0 RECEIVING INSTRUCTIONS
Visually inspect all components for shipping damage.
Shipping damage is not covered by warranty. If shipping
damage is found, notify carrier at once. The carrier is
responsible for all repair and replacement costs resulting
from damage in shipment.