6
See Figure 1 for a description of cutter major features
and typical items included in the shipment. Refer to
Section 2.0 for maximum cutting capacities,
specifications and dimensions.
5.0 RECEIVING INSTRUCTIONS
Visually inspect all components for shipping damage.
Shipping damage is not covered by warranty. If shipping
damage is found, notify carrier at once. The carrier is
responsible for all repair and replacement costs resulting
from damage in shipment.
6.0 SET-UP
6.1 Hydraulic Pump Requirements
The cutter must be used in conjunction with a specially
designed hydraulic pump (sold separately). This pump
contains unique valving and controls that are specific to
the cutter.
Refer to the pump instruction sheet for detailed
pump setup and operation instructions. Also refer to
Section 6.4 of this manual for additional details.
3.0 CONFORMANCE TO NATIONAL AND
INTERNATIONAL STANDARDS
Enerpac declares that this product has been
tested and conforms to applicable
standards and is compatible with all CE
requirements. A copy of an EU Declaration
of Conformity is enclosed with each shipment of this
product.
4.0 DESCRIPTION
The Enerpac model EBH35 is a fixed-head hydraulic
cutter designed to cut round, square or flat metal bars
and other similar items.
The cutter contains two blades, one fixed and one
moving. The moving blade is actuated by an integral
double-acting hydraulic cylinder. The double-acting
design ensures positive blade return and also helps
prevent jamming or sticking.
Hydraulic power is supplied by an Enerpac hydraulic
pump, which is sold separately from the cutter. Refer to
Section 6.1 for additional pump information.
Figure 1, Features and Components
3
4
6
7
8
9
1
2
5
Key:
1. Safety Guard
2. Cutting Head
3. Lifting Eye
4. Positioning Handle #2
5. Push Buttons (advance - retract)
6. Positioning Handle #1
7. Hydraulic Hoses and Electrical Cable (short length)
8. Hydraulic Cylinder
9. Support Bolt
