Energie ECO100esm, Technical Manual

Page: 29 / 36

59
ECO100
English
Technical Manual
Power con-
sumption is
abnormally
high and
constant
Loss or obstruction in cooling circuit
Check that the piping is not damaged.
Employ equipment suitable for checking leaks
in the circuit.
Dire environmental conditions
Support re-
sistance does
not work
Thermostat failure Check the condition of the thermostat.
Defective resistance Check the condition of the resistance.
Bad odour
Absence of siphon or siphon without
water
Install and make sure the siphon has water.
Others
Contact customer service.
PROBLEM POSSIBLE CAUSES HOW TO PROCEED
11. SYSTEM MAINTENANCE
DANGER
• Before undertaking any maintenance operation on the equipment, make sure it
is not plugged to the power supply!
• Any intervention should be performed by a qualified technician.
Although the fluid in the cooling circuit is environmentally-friendly, it must not be released
into the atmosphere.
Forms of recovery must be arranged.
11.1. General Inspection
• During the equipment’s useful life, the owner should carry out a general inspection of the equipment,
according to the place where the equipment is set up:
• External cleaning of equipment and surrounding areas with a wet cloth
• Visual inspection of the whole equipment, with the purpose of detecting possible leaks and damaged
devices
11.2. Empty the Storage Water Heater
After ensuring the water temperature is at a safe level that will avoid burns, follow this procedure:
• Unplug the system from the power supply
• Shut off the water supply valve and open a hot water tap
• Open the system discharge valve
11.3. Magnesium Anode
This equipment has a magnesium anode that together with the building material of the tank will provide an
effective protection against corrosion.
DANGER
Remember that the water in the storage water heater is at a high temperature, so
there is an associated risk of burns.
Before emptying the storage water heater, allow the water temperature to drop
to a level that avoids burns.