Energie ECO100esm, Technical Manual

Page: 15 / 36

45
ECO100
English
Technical Manual
WARNING
The cooling fluid couplings must be done by a qualified technician, with a profession -
al certificate of qualifications for this purpose.
The thermodynamic unit holds a pre-load of fluid R134a.
WARNING
The cooling fluid couplings must be thermally insulated in order to prevent burns and
to ensure an optimal system performance.
The pipe shall be a copper pipe of the refrigeration type (Cu DHP type according to
ISO1337 standards)
DIAMETER OF THE PIPES
GAS
(suction)
LIQUID
(panel inlet)
Nº panels Inches Inches
1 3/8’’ 1/4’’
4.4.1. Connection to the Panel
a) Prepare the copper pipe, removing the protective caps from the extremities.
b) Place the extremity of the pipe upside down, cut the appropriate size of pipe and sand the rough
edge.
c) Remove the females from the couplings in the panes and insert them in the pipe.
4.4.Refrigerant Connections