ENERGIE
Page | 8
•
Warn the user of the obligation to make the checking and
maintenance of the equipment when necessary;
•
Supply to the user all the documents provided with the equipment
(manual and warranty datasheet).
5.
Propose of the heat pump
The heat pumps are currently the most suitable equipment to improve
efficiency in energy consumption. With this technology it is possible to
take from the environment the highest power, using only an electrical
power 3-5 times lower than the thermal energy transferred.
The thermal energy produced can be transferred to a central under floor
heating system, fan coil, low temperature radiators and DHW (domestic
hot water).
This equipment is very easy to install on the outside of your house,
ensuring all thermal comfort, even at low outdoor temperatures.
6.
Heat pump features
Inverter air source water heat pump is a kind of high efficiency, energy
saving and environment friendly equipment, which is mainly used for
house warming.
This series of heat pump unit owns following features:
•
Advanced controlling
The PC microcomputer based controller is available for the users to
review or set the running parameters of the heat pump.
•
Nice appearance
The heat pump is designed with beautiful looking. The monobloc one
has the water pump included which is very easy for installation.
•
Flexible installation
The unit has smart structure with compact body, just simple outdoor
installation is needed.
•
Quiet running
High quality and efficient compressor, fan and water pump is used to
ensure the low noise level with insulation.
•
Good heat exchange rate
The heat pump unit use special designed heat exchanger to enhance
whole efficiency.
•
Large working range
This series of heat pump is designed to work under different working
conditions as low as -15 degrees for heating.