22/44
2. Equalization cycle
During the equalization: The LED is BLUE (flashing
After the charging process has been ended, if the battery is connected to the
charger for more than 14 hours, the control card performs the equalization cycle.
End of equalization: The LED is BLUE (solid)
Equalization is intended to bring all cells to the same state of charge, and to balance
out the natural imbalances that occur during the life of the battery.
At the end of the equalization cycle, the RGB LED lights up with a solid BLUE colour.
3. Delay on start
It is possible to delay the start by setting it on the charger. This allows the battery
to cool down before the charging process, or for the charger to operate during
off-peak hours.
If you have made this setting, the charger will wait for 1 hour before starting
charging.
If you still wish to start the charging process during the delay period, you can do so
by pressing the START/STOP button.
In this case the LED is WHITE (solid).