Energetics POWER RUN 1.8, Owner'S Manual

Page: 3 / 24

3
COMPUTER INSTRUCTIONS
BUTTON FUNCTIONS:
1. PROGRAM
While the treadmill is not in motion, this button is used to select the individual programs (12 programs in
total, P1, P2…P12).
2. MODE
While the treadmill is not in motion, this button is used to select the individual target modes. Time counts
down to zero, distance counts down to zero, calories count down to zero. After selecting the individual mode,
please press the speed up (+) or speed down button (-) to adjust the data. After this, please press START to
run the program. The pre-set values will start running down to zero.
3. START
After the treadmill is turned on and the magnetic safety key is attached to the console, press the START
button to start the treadmill.
4. STOP
Press this button to stop the treadmill at any time of the exercise.
5. SPEED + / SPEED –
To adjust the speed level during the workout, press speed up (+) or speed down (-). Each button press
increases or decreases the speed by 0.1 km/h. If you press the button for more than 0.5 seconds, the speed
will be changed in a quicker way.
6. QUICK SPEED BUTTONS 3, 6, 9, 12
Press the button to adjust the speed quickly.
EN
SPEED WINDOW
SPEED+/- BUTTON: To
change the running speed
and set the individual values
START BUTTON: To
start the exercise
STOP BUTTON: To stop
the exercise at any time
PROGRAM BUTTON: To
select the individual program
MODE BUTTON: To
select and set pre-values
TIME/DISTANCE WINDOW
CALORIE/PULSE WINDOW
3/6/9/12 QUICK SPEED BUTTONS