Mi
Home House Monitor
User Guide
The
Mi
|Home House Monitor is part of the
Mi
|Home
home automation range. This allows you to monitor
the power and energy usage of your entire home.
The Monitor sensor clamps onto your mains power
cable by the electricity meter and sends power
readings to your
Mi
|Home network via short-range
radio signals from its transmitter unit.
This then allows
Mi
|Home to calculate the energy
you are consuming in your property over time.
In the Box:
•
1 x current clamp and mounting plate
•
1 x transmitter unit
•
3 x AA batteries
•
User guide
Installation
Remove the cover on the battery compartment of
the transmitter and insert the batteries - observing
the correct polarity. Replace the cover. Then plug the
clamp cable into the socket marked
L1
in the
transmitter unit.
You will need to attach the clamp to the insulated
live-feed cable between your electricity meter and
your consumer unit. This cable is usually on the
right hand side of the meter (as in the diagram). You
can also attach to the incoming live supply on the
left hand side of the meter if more convenient.
DO NOT ATTEMPT TO ATTACH TO THE
CABLE IF THERE IS ANY OBSERVABLE
DAMAGE TO THE CABLING. CALL IN A
QUALIFIED ELECTRICIAN!
The installation requires no modification of your
existing arrangement or cutting of cables.
Fix the transmitter unit to the wall or suitable
mounting point.
Pairing the Monitor with the Gateway
To use the adapter in your
Mi
|Home system it must
be “paired” with your
Mi
|Home Gateway.
Please ensure that your device is in range of the
Gateway when you pair it. We suggest 10 meters
and as unobscured (e.g. by furniture or walls) as
possible.
You have two options to pair your Monitor to the
Gateway: either via a web browser or using the
Mi
|Home App.
You will need to create an account and install the
Mi
|Home Gateway before pairing the Monitor.
Via a Browser
Select the option to pair a new device and choose
the
Mi
|Home House Monitor to be paired.
Follow the instructions to hold down the button on
the front of the housing of the adapter until you see
the device appear on the screen as being paired.
Via the Mi|Home App
Follow the instructions on the screen when you run
the App to pair the
Mi
|Home House Monitor.
If you are having trouble with the range you may
need to move the Gateway closer to the transmitter
unit or move any intervening obstruction that may
affect the signal.
Using the Dashboard
You can view and control your paired device by
selecting the Dashboard option on your App or via a
browser.
Technical Specification
•
Power Source: 3 x AA batteries, heavy duty
•
Transmission Frequency: 434.300 MHz
•
Tx duty cycle: <10%
•
Modulation: FSK, Manchester encoded
•
Transmission Interval: 10s
•
Protocol: OpenThings
•
Output: Apparent Power (VA), Battery Level (V)
•
Operating temperature: 0°C to 40°C
•
Storage temperature: -40°C to 85°C
•
Location: Indoor use only
•
Clamp aperture: Ø 14mm
Troubleshooting
•
1.
Any local source of radio noise may effect
operation of the system. This may include poorly
regulated fans or other devices running electric
motors, noisy power supplies or other low quality
electrical and electronic equipment including LED
lights.
•
2.
If your attempt to pair the transmitter unit fails
please try again. Occasionally the signals between
devices may be subject to noise or other outside
interference which is common for radio systems of
this nature.
•
3.
The range of communication between your
Gateway and the device will be affected by anything
in between that may obscure the signal such as
furniture, walls, ceilings, windows, doors etc.
For further help please visit
mihome4u.co.uk/ troubleshooting
or contact us at
Declaration of Conformity
Sandal Plc trading as Energenie declare under our
sole responsibility as importer that the product:
Model: MIHO006 is in accordance with the
following Directive(s):
2006/95/EC
Low Voltage Directive (LVD)
2014/53/EC
R&TTE Directive (Article 3.1b and
3.2)
2002/96/EC
Waste Electrical and Electronic
Equipment (WEEE) Directive
2011/65/EU Restriction of the Use of Certain
Hazardous Substances (RoHS)
Directive Recast
The unit complies with all essential requirements of
the above referenced specifications and directives
and has been issued a CE mark as per directive
93/98/EEC.
The Technical Construction File required is
maintained at the company headquarters at 5
Harold Close, The Pinnacles, Harlow, Essex,
England, CM19 5TH.
Caution
Please be aware that any changes or modifications
not expressly approved in this user guide will void
the warranty on this equipment.
is a trademark belonging to Sandal Plc.
energenie4u.co.uk | mihome4u.co.uk
Energenie
and
Mi
|Home are brand names of
Sandal
Plc
. Registered Office: Claremont House, Deans
Court, Bicester, Oxon, OX26 6BW
Other Notices
THIS DEVICE AND ASSOCIATED SOFTWARE ARE
NOT DESIGNED, MANUFACTURED OR INTENDED
FOR USE OR RESALE FOR THE OPERATION OF
NUCLEAR FACILITIES, THE NAVIGATION,
CONTROL OR COMMUNICATION SYSTEMS FOR
AIRCRAFT OR OTHER TRANSPORTATION, AIR
TRAFFIC CONTROL, LIFE SUPPORT OR LIFE
SUSTAINING APPLICATIONS, WEAPONS
SYSTEMS, OR ANY OTHER APPLICATION IN A
HAZARDOUS ENVIRONMENT, OR REQUIRING
FAIL-SAFE PERFORMANCE, OR IN WHICH THE
FAILURE OF PRODUCTS COULD LEAD DIRECTLY
TO DEATH, PERSONAL INJURY, OR SEVERE
PHYSICAL OR ENVIRONMENTAL DAMAGE
(COLLECTIVELY, "HIGH RISK APPLICATIONS").
YOU AGREE AND ACKNOWLEDGE THAT YOU
HAVE NO LICENSE TO, AND SHALL NOT (AND
SHALL NOT ALLOW A THIRD PARTY TO) USE THE
PRODUCT IN ANY HIGH RISK APPLICATIONS,
AND WHERE PERMITTED BY LAW SANDAL PLC
SPECIFICALLY DISCLAIMS ANY WARRANTY
REGARDING, AND ANY LIABILITY ARISING OUT
OF, HIGH RISK APPLICATIONS.
