Battery Charger BT-C700
Operation Instructions
General Information
● The product is intended to charge and discharge NiCad or NiMH rechargeable
batteries. It provides four independent charging slots for AA/AAA rechargeable
batteries.
● The charger can also optimize and test the maximum capacity of rechargeable
batteries. Each charging slot has its own display to show various information, such
as, charging current, battery voltage, charged/discharged capacity, battery internal
resistance and elapsed charging time.
● The charging current can be selected from 200mA to 1000mA. If 4 batteries are
being charged, then the maximum current for each slot will be limited to 700mA. If
there is no battery in slots 2 or 3, then the maximum current in slot 1 and 4 can be
selected up to 1000mA.
● The charger can charge simultaneously batteries of different types and sizes and
with different capacity. It also includes the Minus Delta Voltage (-ΔV) function, which
monitors the voltage over the charging cycle. When a battery is fully charged, the
charger will switch to trickle charging automatically. Therefore the battery will be kept
at its optimum capacity.
Distributed by ENERdan GmbH | Max-Planck-Straße 3, D-12489 Berlin, Germany
| +49 - (0)30 – 6392-80400 | www.enerdan.de