INSTANT HOT
WATER TAP
www.ener-j.co.uk
1
SKU Code: BW1001
EAN Code: 7103352068254
Instant Hot Water Tap with Adjustable
Temperature
ENER-J’s Instant Water Tap gives you the flexibility of heating
element inside so no separate line required for hot water.
Just the cold water feed is enough. If you don’t have combi-
boiler or have to heat the water seperately, then this is the
perfect product. Stylish design and amazing finish, this tap
will improve the look of your kitchen.
Important Safety Instructions
1. For your satisfaction and safety, read all instructions
before installing or using this instant hot water tap.
2. This particular unit is not intended for commercial use.
3. This appliance should be connected to mains water
feed.
4. This appliance can be used by children aged from 3
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision.
5. Make sure that all electrical wiring, plug and
connections confirm to local codes. Means for
disconnection must be incorporated in the fixed wiring
in accordance with the wiring rules. This appliance
must be installed in accordance with the national
wiring regulations.
6. If you suspect there is too much chlorine in your water,
it is recommended to use a water filtration system.
7. This appliance is forbidden to be switched on hot water
if you think it may be frozen. Wait until you are sure
that it has completely thawed out before you switch it
on .
8. This appliance is forbidden to be switched on hot water
without inlet water supply
9. Filter screen is required to be fixed at the water inlet.
filter screen should be regularly cleared. The outlet
nozzle must be descaled regularly.
10. Rated pressure of the tap is 0 Pa, the gate of water
inlet & outlet mustn’t be blocked. The out-let must not
be connected to any tap or fitting other than those
specified.
11. In cold winter, if the hot water temperature is not hot
enough, the hand shank can be adjusted the water flow
to increase or decrease the hot water temperature.
12. All the appliances was processed water test and
energization test before leaving factory , if there is a
little water at the water inlet and water outlet while
you use it for the first time, it is a normal phenomenon,
please feel at ease to use it.
13. If there is damage to the wire, you must contact
qualified electrician to replace it with dedicated wire
from our authorized dealers.
