Eneo GLS-2101 Instruction Manual Download

Page: 80 / 94

5.2.4.4 Lock

Press the

button to lock the operation of this software, and the eneo GL-Manager

monitor will be minimized into the systray*of the Windows taskbar. To unlock the command,

please click the

button once, then type in the correct password.

The Microsoft Windows systray is a portion of the Windows 95, Windows 98, W indows ME, Windows NT,

Windows 2000, and Windows XP Operating Systems that helps display running programs. The systray is

located on the taskbar and is commonly in the bottom right hand corner of the screen next to the time

display.

5.2.4.5 Logout

Press the

button to logout the eneo GL-Manager

software and the eneo GL-Manager monitor will be minimized

into the systray of the Windows taskbar.

If you want to return to the eneo GL-Manager monitor, please

click the

button once, then select the page which you want to

get into.

After typing in the correct user name and password, you can re-login to the software.

5.2.4.6 Tray

Press the

button to minimize the eneo GL-Manager monitor into the systray of the

Windows taskbar.

Click the

button once to go back to the eneo GL-Manager software.

Summary of Contents for GLS-2101































































































Search results

Summary of Contents for GLS-2101

Reviews:

Related manuals for GLS-2101

Brands by name

Popular brands

Eneo GLS-2101, Instruction Manual

Search results

Summary of Contents for GLS-2101

Reviews:

Related manuals for GLS-2101

Brands by name

Popular brands