Eneo GLS-2101 Instruction Manual Download

Page: 10 / 94

2.3 The USB function

By connecting the Video Server with a PC via the USB connector, the Video Server can provide

different functions.

1. Insert an SD card: As a card reader.

Insert an SD card into the

Video Server, then connect to the PC. You might transfer files

between the SD card and the PC. Once you've connected your Video Server to your computer,

the Windows system will detect the connection and ask you what you want to do with your SD

card.

In another words, if the user connects the Video Server with an SD card and the PC via the

USB connector, the Video Server can be used as a normal card reader.

2. As a configuring tool:

By connecting the Video Server with a PC via the USB connector, you can set the Network

and PPPoE functions of the Video Server directly by your PC.

DHCP ON

DHCP OFF

NOTE:

You can click the “

Launch

” button to link to the home page of the Video Server.

WARNING: After changing the settings, please click the “Apply” button. All of the

options will be effective after removing the USB connector.

Network

Setting

PPPoE

Setting

Summary of Contents for GLS-2101































































































Search results

Summary of Contents for GLS-2101

Reviews:

Related manuals for GLS-2101

Brands by name

Popular brands

Eneo GLS-2101, Instruction Manual

Search results

Summary of Contents for GLS-2101

Reviews:

Related manuals for GLS-2101

Brands by name

Popular brands