Eneo 221890, User Manual

Page: 48 / 80

48
DSCP ID Shows the ID of the current DSCP.
Priority Displays the priority queue to which the current DSCP ID belongs.
8 Network Management
8.1
Trunking
Trunking aggregates multiple physical Ethernet ports to form a logical aggregation group.
The upper entity using the link aggregation service considers the multiple physical links in
the same aggregation group as a logical link . Link aggregation can be achieved out of / load
in the aggregation group between the various member ports to increase bandwidth. At the
same time, each member port in the same aggregation group dynamically backs up each
other, improving connection reliability.
According to the different aggregation methods, link aggregation can be divided into two
modes:

Static aggregation mode
The static aggregation mode is manually configured by the user and does not allow the
system to automatically add or delete ports in the aggregation group. The aggregation
group must contain at least one port. When an aggregation group has only one port, you
can delete the aggregation group from the aggregation group only by deleting the
aggregation group.

Dynamic aggregation mode
Dynamic aggregation mode is a system automatically create or delete the aggregation,
dynamic aggregation group within the port to add and delete LACP protocol is done