19
4 Quick Guide
4.1
Quick Guide
4.1.1 Port VLAN setting:
Enter the [Quick Guide] page, you can see port range, link type, PVID, VLAN forwarding
table, click <configuration> button to modify the settings.
After setting, click the <Save> button at the bottom of the page to save the configuration.
The interface item is described as follows:
Item
description
port range
Enter the port number you want to modify, enter one
or a group of ports, or select from the checkbox
below. If you set a port, enter the corresponding port
number in the port range; if you set a group of ports,
you can use "," or "-" separated.
"," Is used to set a set of discrete ports, such as 1,3,5.
"-" is used to set up a set of consecutive ports, such as
1-8
link type
Select the link type of the port according to the
different processing mode of the tag on the port when
forwarding the packet. You can select Access, Trunk,
and Hybrid.
PVID
Enter the VLAN ID number to be added to the port.
The specified VLAN ID ranges from 1 to 4094.
Summary of Contents for 221890
Page 5: ...5 1 3Board Diagram...
