Enecsys Single Repeater, User Manual

Page: 16 / 25

Single Repeater Installation Manual Intelligent Reliable Power
12
© ENECSYS 2010. All rights reserved.
2.5 Mounting with a cable tie
When mounting an Enecsys Repeater always ensure that you have connected the power supply
and antenna to the device before the final fit.
There may be situations where it is not possible to mount the Enecsys Repeater using the screw
fixed or adhesive pad method. A cable tie can be utilised to fix the Enecsys Repeater to an internal
pillar or suitable structure.
1. Ensure that the cable tie is of the correct width and length.
2. Run the cable tie through the cable tie fixing point on the back of the Enecsys Repeater.
3. Wrap the cable tie around the internal pillar or suitable mounting object and secure.
FIGURE 6.
Mounting with a cable tie
CABLE TIE