Single Repeater Installation Manual
Intelligent Reliable Power
6
© ENECSYS 2010. All rights reserved.
If, after having installed a Repeater in the attic/roof space an ‘x’ indicating that an insufficient
communication link between the Repeater and the Gateway is still displayed a secondary
Repeater can be added (R2).
If the building has a metallic roof as found in an industrial/commercial building then it may be
necessary to use a Double Repeater.
When installing a repeater the Gateway should be placed into installer mode.
FIGURE 2.
Internal Gateway and Repeater placement.
G
R2
R1
INITIAL REPEATER LOCATION
SECOND REPEATER LOCATION
PV MODULE
GATEWAY
ATTIC
1st FLOOR
GROUND FLOOR
Summary of Contents for Single Repeater
Page 1: ...Version 1 0 Single Repeater User Manual Enecsys Micro Inverters intelligent reliable power...
Page 2: ......
Page 24: ......
