21
Version 2.1
English
Important:
This small tank is designed to
hold fresh water for system flush or hand
wash. To flush pump and boom after use,
turn valve handle out to the side. This
will allow the water to flow out of the
small freshwater tank instead of the large
tank. Do not drink this water.
Using the Built-in Flush System
READ INSTRUCTIONS
ON SPRAYER
INSTRUCTIONS
!
1. Close agitation valve.
2. Adjust pressure to 40 PSI.
3.
Switch valve to pull from the flush tank.
4.
Run for 5 seconds or until line is discharging clean water back into tank.
5. Open all valves to purge booms and hand wand. (Depress wand handle
to spray until purged)
6. Disengage PTO.
Steps to Flush Your Sprayer System
CXLT0021
Note:
Disengage PTO as soon as your system has been flushed.
This will conserve your fresh water supply.
Important:
This small tank is designed to hold fresh water for system flush or hand wash.
Do not drink this water.
Watch Instruction Videos:
www.youtube.com/enduraplas
GETTING STARTED
