STEP ONE
STEP TWO
STEP THREE
STEP FOUR
Thermo Sash IIIe
Installation Instructions
Congratulations on your purchase of one of the finest
pet doors made, featuring the exclusive Endura Flap.
TM
Loosen the thumb screws at the end of the sash. This allows the
spring mechanism to move freely side to side.
Note
: Re-tighten the thumb screws after step 3.
Cut the foam weather strip with scissors to the length of the sash.
Peel back the paper on the foam to expose the adhesive. Install the
foam strip in the channels on both the top and the bottom of the sash.
PARTS LIST
1 - Thermo Sash IIIe
1 - Foam Weather Strip
(top and bottom of pet door)
1 - Center Post Weather Seal Strip
(vinyl strip)
Insert the sash into the window
track. Push against the spring
mechanism and swing the
opposite end into the opposite
window track. Gently release.
Tighten the thumb screws.
Mount the vinyl weather strip. This strip prevents air leaking between
the window frame. This vinyl weather strip seals the gap produced
between the two windows when raised to accommodate the sash.
(Figure A)
Note
: Trim to fit as needed with scissors.
Window Locking options:
For a permanent lock, install a wood screw in the track immediately
above the window on both sides. For a temporary lock, place a
removable wooden dowel in both tracks above the window.
(Detail 1)
Thumb
Screw
Spring Mechanism
Adjusts side to side
Detail 1
Figure A
Foam Weather Strip
Foam Weather Strip
Thumb
Screw
Spring Mechanism
Adjusts side to side
Detail 1
Figure A
Foam Weather Strip
Foam Weather Strip
Thumb
Screw
Spring Mechanism
Adjusts side to side
Detail 1
Figure A
Foam Weather Strip
Foam Weather Strip
2
2
1
1
3
3
4
4
These images are representative.
Appearance of your pet door may
vary slightly depending on model.
Thumb
Screw
Spring Mechanism
Adjusts side to side
Detail 1
Figure A
Foam Weather S
trip
Foam Weather S
trip
For expert installation help,
replacement flaps and parts or
other quality pet door products,
visit
PetDoors.com
or call
800-826-2871
Thumb
Screw
Spring Mechanism
Adjusts side to side
Detail 1
Figure A
Foam Weather Strip
Foam Weather Strip
Endura Flap
TM
|
U.S. Pat. No. 7,814,956
|
Pat. Pending
