EndRun Sonoma N12, User Manual

Page: 90 / 174

S o n o m a U s e r M a n u a l 74
C H A P T E R N I N E
75 S o n o m a U s e r M a n u a l
C O N T R O L A N D S T A T U S C O M M A N D S
antfltmask
This command displays the current setting for the Antenna Fault Mask.
Command:
antfltmask
Sonoma reply:
Antenna Fault is ENABLED
caldelay
This command displays the current calibration delay setting. The allowable calibration delay range is
±500,000 nanoseconds.
Command:
caldelay
Sonoma reply:
+0 nanoseconds
cpuio (Optional)
See Chapter 10 - Options, CPU Module Options for information on this command.
cpuioconfig (Optional)
See Chapter 10 - Options, CPU Module Options for information on this command.
cpustat
This command shows a group of key values for monitoring the health of the Linux CPU and operat-
ing system status. The format is:
YYYYMMDD.HH:MM:SS LLL% TT.TC
Where:
YYYY is the year of the UTC timestamp of the most recent update.
MMDD is the month and day-of-month of the UTC timestamp of the most recent update.
HH:MM:SS is the hour, minute and second of the UTC timestamp of the most recent update.
LLL% is the percentage of maximum load as returned using the Linux
vmstat
command.
FREEkB is the available free memory in kilobytes as returned using the Linux
vmstat
command.
+TT.TC is the temperature in degrees centigrade of the Linux CPU die temperature.
Command:
cpustat
Sonoma reply:
20170116.22:24:00 23% 320056kB +67.9C