Endress ESE 1107 DBG DIN, Operating Instructions Manual

Page: 35 / 77

Status at: February 2013 ESE 807 / 1107 / 1307 / 1407 DBG (ES) DIN
35
The following requirements must be met:

The generator must be switched off (see 4.5).

The device must be cooled down.

Adequate ventilation must always be available

Appliances switched off or disconnected
WARNING!
Leaking engine oil and petrol can burn or explode!

Prevent leaking of engine oil and petrol.

Generator is switched off.

Generator has cooled down.

Avoid open flames and sparks.
WARNING!
Leaking engine oil can contaminate the soil and
groundwater.

Do not fill the tank completely.

Use a filling aid.
WARNING!
Using the wrong fuel will destroy the engine.

Use only lead-free ROZ 95 premium petrol.
Refuel the generator as follows:
1.
Set the fuel cock to "closed“
(Fig. 5-10-(1))
as necessary.
2. Unscrew tank cover.
3. Insert filler aid into the filler neck.
4. Add petrol.
5. Remove filler aid.
6. Screw on tank cap

The device is refuelled.
Starting the generator
4.4
The following requirements must be met:

Electrical safety check (see 6.3)

Fuel tank has been filled (see 4.3)

A possibly connected fuelling device (special accessory)
Requirements
Refuelling the device
Requirements