manualshive.com logo in svg

Endress+Hauser WirelessHART Fieldgate SWG70, Operating Instructions Manual, Page: 38 / 138

Share
Download
Endress+Hauser WirelessHART Fieldgate SWG70 Operating Instructions Manual Download Page 38

Commissioning

WirelessHART Fieldgate SWG70

38

E Hauser

7.3.2

Adding the Fieldgate SWG70

1. Right-click 

HART IP Communication

 and select 

Add Device

:

2. The 

Add New Device

 dialog opens:

– Select 

WirelessHART Fieldgate SWG70 

 and press 

OK.

3. The dialog closes and the Fieldgate SWG70 DTM is added below the HART IP node.

4. If the factory IP address (192.168.1.1) or the Ethernet Port (5094) of the Fieldgate 

SWG70 has been changed, right-click on the 

HART IP Communication

 node and select 

Additional Functions => Set DTM Addresses...

– The 

Set DTM Addresses Dialog opens:

5. Enter the new IP address and/or Ethernet UDP Port number and press Update Changed 

Data.

6. Close the dialog – the Fieldgate SWG70 can now be put online.

Summary of Contents for WirelessHART Fieldgate SWG70











































































































































Reviews:

No comments