Mounting
Waterpilot FMX21
24
Hauser
• To make installation easier, Hauser marks the extension cable if a customer-
specific length has been ordered.
• Cable marking tolerance (distance to lower end of level probe):
Cable length < 5 m (16 ft): ±17.5 mm (0.69 in)
Cable length > 5 m (16 ft): ±0.2 %
• Material: PET, stick-on label: acrylic
• Immunity to temperature change: –30 to +100 °C (–22 to +212 °F)
NOTICE
The marking is used exclusively for installation purposes.
‣
The mark must be thoroughly removed without trace in the case of devices with
drinking water approval. The extension cable must not be damaged in the process.
Not for the use of the device in hazardous areas.
5.11 Cable shortening kit
A0030948
The cable shortening kit is used to shorten a cable easily and professionally.
The cable shortening kit is not designed for the device with FM/CSA approval.
• Ordering information: see Product Configurator
• Associated documentation SD00552P/00/A6.
5.12 Post-mounting check
• Is the device undamaged (visual inspection)?
• Does the device conform to the measuring point specifications?
• Process temperature
• Process pressure
• Ambient temperature
• Measuring range
• Are the measuring point identification and labeling correct (visual inspection)?
• Check that all screws are firmly seated
Summary of Contents for Waterpilot FMX21
Page 143: ......
