Waterpilot FMX21
Description of device parameters
Hauser
115
Write permission
No write permissions. Parameter is read only.
Description
The secondary value is displayed.
Third value is
Write permission
No write permissions. Parameter is read only.
Description
Indicates which measured value is transmitted via the HART protocol as the third process
value. The process value is configured via HART command 51.
Factory setting
• "Pressure" measuring mode: "Sensor pressure"
• "Level" measuring mode, "Linear" lin. mode: "Corrected press."
• "Level" measuring mode, "Activate table" lin. mode: "Meas. pressure"
Display
Depending on the selected measuring mode, the following measured values can be
displayed:
• "Meas. pressure"
• "Sensor pressure"
• "Corrected press."
• "Pressure af.damp"
• "Sensor temp."
• "Level before Lin"
• "Tank content"
• "Process density" (corrected)
Third value is
Write permission
No write permissions. Parameter is read only.
Description
The third value is displayed.
4th value is
Write permission
No write permissions. Parameter is read only.
Description
Indicates which measured value is transmitted via the HART protocol as the fourth process
value. The process value is configured via HART command 51.
Factory setting
• "Pressure" measuring mode: "Sensor temp"
• "Level" measuring mode, "Linear" lin. mode: "Sensor temp."
• "Level" measuring mode, "Activate table" lin. mode: "Sensor temp."
Display
Depending on the selected measuring mode, the following measured values can be
displayed:
Summary of Contents for Waterpilot FMX21
Page 143: ......
