Description of device parameters
Waterpilot FMX21
114
Hauser
14.14 Expert→ Communication → HART output
Primary value is
Write permission
No write permissions. Parameter is read only.
Description
Indicates which measured value is transmitted via the HART protocol as the primary
process value.
Factory setting
Depending on the selected measuring mode, the following measured values can be
displayed:
• "Pressure" measuring mode: "Meas. pressure"
• "Level" measuring mode, Lin. mode "Linear": "Level before Lin"
• "Level" measuring mode, Lin. mode "Activate table": "Tank content"
Primary value
Write permission
No write permissions. Parameter is read only.
Description
The primary value is displayed.
Secondary val.is
Write permission
No write permissions. Parameter is read only.
Description
Indicates which measured value is transmitted via the HART protocol as the secondary
process value. The process value is configured via HART command 51.
Factory setting
• "Pressure" measuring mode: "Corrected press."
• "Level" measuring mode, "Linear" lin. mode: "Meas. pressure"
• "Level" measuring mode, Lin. mode "Activate table": "Level before linearization"
Display
Depending on the selected measuring mode, the following measured values can be
displayed:
• "Meas. pressure"
• "Sensor pressure"
• "Corrected press."
• "Pressure af.damp"
• "Sensor temp."
• "Level before Lin"
• "Tank content"
• "Process density" (corrected)
Secondary value
Summary of Contents for Waterpilot FMX21
Page 143: ......
