Endress+Hauser Waterpilot FMX21, Operating Instructions Manual

Page: 105 / 144

Waterpilot FMX21 Description of device parameters
Hauser 105
14.10 Expert → Measurement → Sensor trim
Lo trim measured
Write permission Parameter is read only. Only Hauser Service has write permission.
Description Displays the reference pressure present to be accepted for the lower calibration point.
Hi trim measured
Write permission Parameter is read only. Only Hauser Service has write permission.
Description Displays the reference pressure present to be accepted for the upper calibration point.
Lo trim sensor
Write permission No write permissions. Parameter is read only.
Description Sensor module recalibration by entering a target pressure while simultaneously and
automatically accepting a reference pressure present for the lower calibration point.
Hi trim sensor
Write permission No write permissions. Parameter is read only.
Description Sensor module recalibration by entering a target pressure while simultaneously and
automatically accepting a reference pressure present for the upper calibration point.