Installation
Viomax CAS51D
22
Hauser
As an alternative to bypass operation, you can also direct the sample flow from a filter unit
with an open outlet through the assembly:
2
1
3
A0032921
20
Flow assembly with open outlet
1
Pump
2
Open outlet
3
Filter unit
5.5
Mounting the cleaning unit
Sensors with gap width of 2 mm or 8 mm
Mount the compressed air cleaning unit prior to installing the sensor in the measuring
point, or remove the sensor from the medium. Clean the sensor if necessary.
1.
Screw the elbow plug from the accessory kit into the mounting hole behind the
sensor gap, and tighten by hand as far as it will go.
2.
Connect the compressed air supply provided by the customer. The hose piece with
hose coupling provided with the sensor can be used if desired.
Summary of Contents for Viomax CAS51D
Page 39: ......
Page 40: ...www addresses endress com ...
