Endress+Hauser Topclean S CPC30, Operating Instructions Manual

Page: 17 / 178

Topclean S 4 Wiring and pneumatic connection of Topclean S
Hauser 17
4 Wiring and pneumatic connection of Topclean S
Connection of the Topclean S system is carried out in several steps:
1. Connecting required electric lines
2. Connecting optional electric lines
3. Connecting hoses for liquids and compressed air
4.1 Connection of required electric lines
4.1.1 Power supply and communication line of Mycom and CPG30
C07-CPC30xxx-04-12-00-xx-009.eps
ƒig. 11: Power supply and communication cable
To connect power supply for Mycom S CPM153
1. Insert the power cable through the right-hand Pg cable gland into the Mycom housing.
2. Connect the yellow-green wire to the PE terminal.
3. Connect the two other wires to the "L" and "N" terminals in the lower right-hand housing
section.