Endress+Hauser Topclean S CPC30, Operating Instructions Manual

Page: 108 / 178

6 Commissioning Topclean S
108 Hauser
Instrument check
Display
Keypad
RAM
EEPROM
Flash Select check
Display
: All the fields are queried alternately. Defective
cells become visible.
Keypad : All the keys must be pressed one after the other. If
the system is functioning perfectly, the appropriate symbols
appear in the display.
RAM : "RAM O.K" message if there are no errors.
EEPROM : "EEPROM O.K" message if there are no errors.
Flash (memory): "Flash OK" message if there are no errors.
!
Note!
Leave this item by pressing "PARAM".
DAT download (only available when DAT module is plugged in):
DAT write
DAT read
Erase DAT
DAT selection
DAT write : You can save both the configuration and the
logs of your transmitter to the DAT module.
DAT read : Copy the configuration saved on the DAT
module into the EEPROM of the transmitter.
Erase DAT : Delete all data on the DAT module.
!
Note!
After the "Read from DAT" copying procedure, a reset is
triggered automatically and the device is configured with
the copied values. (See below for reset).
DAT write:
!!Caution!! All data on the DAT module will be deleted. Note in display
For safety reasons, you are asked if you really want to
overwrite the existing data.
in progress Data are written to the DAT module
DAT read:
!!Caution!! All data in Mycom S will be deleted. Note in display
For safety reasons, you are asked if you really want to
overwrite the existing data of Mycom S.
in progress Copy
The data from the DAT module are copied to the EEPROM
of the transmitter.
!
Note!
After the "Read from DAT" copying procedure, a reset is
triggered automatically (similar to a soft reset on a
computer, see below).
Erase DAT:
!!Caution!! All data on the DAT module will be deleted. Note in display
For safety reasons, you are asked if you really want to delete
the existing data.
in progress Erase
The data are deleted from the DAT module.
CHOICE
(default = bold) INFO
Hold
pH 7. 00
Diag
[E]
Next
Check systems
Edit[¯]
Display
Key pad
RAM
EEPROM
Flash
Hold
pH 7. 00
Diag
[E]
Next
DAT
Edit[¯]
DAT write
DAT read
Erase DAT