TOC Analyzer CA79
Commissioning
Hauser
31
8.3.6
Autostart
If the system is interrupted during a measurement (due to a power outage, for example),
the
Autostart
window appears when the system is restarted. If the user does not stop
autostart by pressing the
Deactivate autostart
key, the interrupted measurement is
restarted.
A0046966
21
Autostart window
Deactivating/activating autostart
1. Open the
Settings
menu.
2. Select the
Options 2
tab.
3. Activate/deactivate autostart via the
Continue after error
In conjunction with the trigger, the system only starts the measurement if the
corresponding input signal is also present.
8.3.7
Shutdown procedure
1. Open the main menu.
A0046942
22
Main menu
2. Press the
Quit
key.
A window for authorization is displayed. The following steps must be performed
for the switch-off procedure (only possible with the service ID).
3. Enter the user-defined password.
