manualshive.com logo in svg

Endress+Hauser Teqwave T, Operating Instructions Manual, Page: 18 / 54

Share
Download
Endress+Hauser Teqwave T Operating Instructions Manual Download Page 18

Operating options

Teqwave T

18

Hauser

7.3

Access to the measuring device via the operating tool

The measuring device is configured via the "Teqwave Mobile Viewer" operating tool. In 

addition, the operating tool enables the reading and graphic representation of the measured 

values.
Supported functions:

• Read, display, delete and export measured values saved in the transmitter

• Create report of saved measured values

• Read out and create report of results of functional tests

• Configure the operating language of the transmitter

• Add, delete and group measurement points

• Create new measurement points

• Create and save device configurations (Configuration manager)

7.3.1

System requirements

Hardware

Computer software

7.3.2

Software installation

Installing the "Teqwave Mobile Viewer" operating tool

1. Close all applications.
2. Insert the CD-ROM supplied into the drive.
3. Double-click the "setup.exe" file to start the installation.
4. Follow the instructions in the installation window.

Connecting cable

USB 2.0, Type A to Type B

Computer

USB port

Screen

Recommended screen resolution: min. 1024 x 768 pixels

Recommended operating 
system

Microsoft Windows 7 or higher

Drivers

USB driver

Summary of Contents for Teqwave T























































Reviews:

No comments