Teqwave H
Operation options
Hauser
31
8
Operation options
8.1
Overview of the operation options
The measuring device can be operated in the following ways:
• Operation via the local display (transmitter with touch screen)
• Operation via the "Teqwave Viewer" operating tool supplied
8.2
Access to the measuring device via the local display
If you are using the transmitter with a touch screen, it is possible to access the measuring
device via the transmitter touch screen and via the "Teqwave Viewer" operating tool.
If the transmitter is located in the stainless steel housing, the housing must be opened
and the housing cover removed to gain access to the touch screen.
Functions supported by the transmitter with a touch screen:
• Display and graphic visualization of measured variables
• Selection of a concentration app or recipe
• Device configuration
8.2.1
Operational display of the transmitter with a touch screen
The operational display is used to display the measured values and the sensor status. In
addition, users can access the Settings menu from this display. Select a measured variable
to switch to the graph display format.
2
1
3
4
5
A0035464-EN
15
Operational display
1
Measured value display
2
Settings menu
3
Status display
4
Name of the concentration app or recipe
5
Scroll bar
Measured value display
Each line shows an active measured variable, its name and the physical unit and measured
value. Users can choose from a total of three different display modes, in which three, five
or seven measured values can be displayed. If there are several measured values, users
must scroll down using the scroll bar on the right to be able to see all the measured
variables.
