J22 TDLAS Gas Analyzer
Operating Instructions
Hauser
49
Example: Changing the tag name in the Tag description parameter from 001-FT-101 to 001-FT-102
A0029563-EN
Fig 50. Changing the tag name in “Tag description” parameter
A message is displayed if the value entered is outside the permitted value range.
A0014049-EN
Fig 51. Value entered is outside permitted value range
5.5.5
User roles and related access authorization
The two user roles Operator and Maintenance have different write access to the parameters if the customer defines a
user-specific access code. This protects the device configuration through the local display from
Access authorization to parameters: Operator user role
Access Code Status
Read Access
Write Access
An access code has not yet been defined (Factory setting).
After an access code has been defined.
—
1
1 Despite the defined access code, certain parameters can always be modified and thus are exempted from the write protection, as they do not affect
the measurement (refer to the
Write protection through access code
section).
