Solitrend MMP42
Operating options
Hauser
19
7
Operating options
1
2
3
4
5
6
7
IMP-Bus
RS485
A0040211
12
Overview
1
Round sensor, short
2
Round sensor, middle
3
Rectangular sensor
4
Remote display
5
Computer
6
LED display
7
PLC or water dosing computer
8
Commissioning
8.1
Analog outputs for measured value output
The measured values are output as a current signal via the analog output. The sensor can be
set to 0 to 20 mA or 4 to 20 mA.
Output 1 can be scaled at the factory, or can be subsequently scaled individually (user-
defined setting) using the remote display (optionally available), e.g. 0 to 10 %, 0 to 20 %
or 0 to 30 %
• Output 1: moisture in % (variably adjustable)
• Output 2: conductivity 0 to 20 mS/cm or temperature 0 to 100 °C (32 to 212 °F), this also
applies for the high-temperature version.
Summary of Contents for Solitrend MMP42
Page 27: ......
