Soliswitch FTE20
Installation
Hauser
15
A0017698
å
8
Mounting the weather protection cover
4.3.4
Installation in hazardous areas
When installing the point level switch in a hazardous area, the securing screw must be tightened
to prevent the cover from opening.
Additional installation instructions for the hazardous area are provided in the separate Ex
documentation for the device (optional).
T10
A0017368
å
9
Tightening the cover securing screw. A universal screw is used; a flat-bladed screw driver can be
used instead of the torx screw driver T10.
4.4
Post-installation check
• Is the seal undamaged?
• Is the process connection securely tightened?
• Do the cable entries point downwards?
