Incoming acceptance and product identification
RLN42
8
Hauser
Compare and check the data on the nameplate of the device against the requirements of
the measuring point:
6
0044
iTEMP
®
TMT82
Made in Germany 2012 D-87484 Nesselwang
TAGXXXXXXXXXXX
TAGXXXXXXXXXXX
Order code: TMT82-xxx/xx
Ext. ord. cd.: XXXXXXXXXXX
Ser. no.: XXXXXXXXX
Input: 12-42 V
Current cunsum.: 23,0 mA
1
EH 08.001X
II3G Ex nA II T6/T5/T4 Ta= -40 ...+ 55/70/85°C
II3G Ex nL IIC T6/T5/T4 Ta= -40 ... +55/70/85°C
Install per XA0xxxxT/09/a3/xx.xx
7
1
2
3
4
5
7
8
A0041996
1
Nameplate (example of Ex version)
1
Product name and manufacturer ID
2
Order code, extended order code and serial number, DataMatrix 2D code, FCC-ID (if applicable)
3
Power supply and current consumption, output
4
Approval in hazardous area with number of the relevant Ex documentation (XA...)
5
Fieldbus communication logo
6
Firmware version and device revision
7
Approval logos
8
2 lines for the TAG name
4.2.2
Name and address of manufacturer
Name of manufacturer:
Hauser Wetzer GmbH + Co. KG
Address of manufacturer:
Obere Wank 1, D-87484 Nesselwang
Model/type reference:
RLN42
4.3
Scope of delivery
The scope of delivery comprises:
• Device as per order
• Printed copy of the Brief Operating Instructions
• Optional: Functional safety manual (SIL mode)
• Additional documentation for devices which are suitable for use in the hazardous area
(
0
1
), such as Safety Instructions (XA...), Control or Installation Drawings (ZD...).
4.4
Certificates and approvals
For certificates and approvals valid for the device: see the data on the nameplate
Approval-related data and documents:
www.endress.com/deviceviewer
→ (enter the
serial number)