RIA45
Operation
Hauser
15
3. Start the "Service (CDI) FXA291" macro by double-clicking it and confirm the subsequent
query with "Yes".
A search for a connected device is performed and the suitable DTM is opened.
Online configuration is started.
Continue with device configuration in accordance with these Operating Instructions for the
device. The complete Setup menu, i.e. all of the parameters listed in these Operating
Instructions, can also be found in the FieldCareDevice Setup.
In general, it is possible to overwrite parameters with the FieldCare PC software and the
appropriate device DTM even if access protection is active.
If access protection by means of a code should be extended to the software, this function
should be activated in the extended device setup.
For this, select Menu → Setup / Expert → System → Overfill protect → German WHG and
confirm.
6.2
Display and device status indicator / LED
The process indicator provides an illuminated LC display which is split into two sections. The
segment section displays the value of the channel and additional information and alarms.
In the dot matrix section, additional channel information, such as the TAG, unit or bar graph,
is displayed in the display mode. Operating text in English is displayed here during operation.
The parameters for configuring the display are described in detail in the "Configuring the
device" section of the Operating Instructions.
