Prosonic M FMU44 HART
Diagnostics and troubleshooting
Hauser
33
Activating the horizontal zoom mode
1. Press or .
or
is displayed.
2. increases the horizontal scale.
3. reduces the horizontal scale.
Activating the move mode
1. Then press .
or
is displayed.
2. moves the curve to the right.
3. moves the curve to the left.
Activating vertical zoom mode
1. Press again
1 is displayed.
2. increases the vertical scale.
3. reduces the vertical scale.
The display symbol shows the current zoom factor 0 to 3
Exiting the navigation
1. Press repeatedly.
Cyclically run through the various modes of the envelope curve navigation.
2. Press simultaneously.
The set increases and shifts are retained.
3. Activate the
Recording curve (0E2)
function again.
Standard display is shown.
10
Diagnostics and troubleshooting
10.1 Present error
Display
• Error symbol in
Measured value display (000)
•
Diagnostics (0A)
function group,
Present error (0A0)
function
• The error with the highest priority is displayed.
• Several errors currently pending: scroll through the error messages with or .
10.2 Previous error
Display
Diagnostics (0A)
function group,
Previous error (0A1)
function
Clear the display in the
Clear last error (0A2)
function
