Endress+Hauser Proservo NMS83, Operating Instructions Manual, Page: 276 / 318

Operating menu Proservo NMS83
276 Hauser
"Safety settings" submenu
Navigation  Setup → Advanced setup → Safety settings
Output out of range 
Navigation  Setup → Advanced setup → Safety settings → Output out range
Description Selection of behavior when displacer reached High stop level (→  171) , Low stop level
or Reference position .
Selection • Last valid value
• Alarm
Factory setting Last valid value
Additional information
Read access Operator
Write access Maintenance
High stop level 
Navigation  Setup → Advanced setup → Safety settings → High stop level
Description Position of the displacer high stop as measured from defined zero position (tank bottom or
datum plate).
User entry –999 999.9 to 999 999.9 mm
Factory setting Dependent on the device version
Additional information
Read access Operator
Write access Maintenance
Low stop level 
Navigation  Setup → Advanced setup → Safety settings → Low stop level
Description Position of the displacer low stop as measured from defined zero position (tank bottom or
datum plate).
User entry –999 999.9 to 999 999.9 mm
Factory setting 0 mm