Endress+Hauser Proline t-mass A 150, Operating Instructions Manual, Page: 77 / 134

Proline t-mass A 150 HART Operation
Hauser 77
Totalizer value One of the following options is
selected in the
Assign process
variable parameter of the
Totalizer submenu:
• Mass flow
• Corrected volume flow
• FAD volume flow
Displays the current
totalizer counter value. Floating-point number
with sign
Totalizer overflow One of the following options is
selected in the
Assign process
variable parameter of the
Totalizer submenu:
• Mass flow
• Corrected volume flow
• FAD volume flow
Displays the number of
totalizer overflows.
Value range:
0 to 32
000
Integer
11.3.3 Output values
The Output values submenu contains all the parameters needed to display the current
measured values for every output.
Navigation path
"Diagnostics" menu → Measured values → Output values
Structure of the submenu
Output values →
Output current
Pulse output
Output frequency
Switch status
Parameter overview with brief description
Parameter Prerequisite Description Display
Output current - Displays the current
current value of the
current output. 3.6 to 22.5 mA
Pulse output Pulse must be selected as the
operating mode.
Displays the current
value of the pulse
output. Positive floating-point
number
Output frequency Frequency must be selected as the
operating mode.
Displays the current
value of the frequency
output. 0.0 to 1 000 Hz
(Up to 1 250 Hz in the
error mode)
Switch status Switch must be selected as the
operating mode.
Displays the current
switch output status. • Open
• Closed