Endress+Hauser Proline t-mass A 150, Operating Instructions Manual, Page: 75 / 134

Proline t-mass A 150 HART Operation
Hauser 75
11 Operation
11.1 Adjusting the operating language
See the "Commissioning" section for information on how to set the operating language
→  48.
11.2 Configuring the display
• Basic settings for local display
• Advanced settings for local display →  53
11.2.1 Navigation path
"Display/operat." menu
"Display" submenu
Display →
Format display
Contrast display
Display interval
11.2.2 Parameter overview with brief description
Parameter Description Selection/
User entry
Factory setting
Format display Select how measured
values are shown on the
display. • 1 value, max. size
• 1 ba 1 value
• 2 values
• 1 value large + 2 values
• 4 values 1 value, max. size
Contrast display Adjust the contrast of the
local display to ambient
conditions (reading
angle). 20 to 50 % 30 %
Display interval Set time measured values
are shown on display if
display alternates
between values. 1 to 10 5
11.3 Reading measured values
You can read all measured values using the Measured values menu.
Navigation path
Diagnostics → Measured values
11.3.1 Process variables
The Process variables submenu contains all the parameters needed to display the current
measured values for every process variable.