Endress+Hauser Proline t-mass A 150, Operating Instructions Manual, Page: 65 / 134

Proline t-mass A 150 HART Commissioning
Hauser 65
10.5.6 Configuring the output conditioning
The damping and the step response time can be configured in the Display behavior
submenu.
Navigation path
"Setup" menu → Advanced setup → Output conditioning
Structure of the submenu
Output conduct →
Display damping
Current output →
Response time
Damping
PFS output →
Response time
Damping
Parameter overview with brief description
Parameter Description Selection/
User entry
Factory setting
Display damping Set the reaction time of
the local display to
fluctuations in the
measured value. 0.0 to 999.9 sec 0.0
Response time
Output Displays the calculated
step response time - 0
Output damping Set the reaction time of
the output signal to
fluctuations in the
measured value. 0.0 to 999.9 sec 0.0