Endress+Hauser Proline t-mass A 150, Operating Instructions Manual, Page: 57 / 134

Proline t-mass A 150 HART Commissioning
Hauser 57
Parameter Description Selection/
User entry
Factory setting
Corrected volume flow
unit Select the unit for
corrected volume flow.
Result
The selected unit applies
for all outputs
Nl/s
Nl/min
Nl/h
Nl/d
Nm³/s
Nm³/min
Nm³/h
Nm³/d
Sl/s
Sl/min
Sl/h
Sl/d
Sm³/s
Sm³/min
Sm³/h
Sm³/d
Scf/s
Scf/min
Scf/h
Scf/d Country-dependent:
• Nm³/h
• Scf/min
Corrected volume unit Select the unit for volume. Nl
Nm³
Sl
Sm³
Scf
Country-dependent
• Nm³
• Scf
FAD volume flow unit Select the unit for the
FAD volume flow.
Result
The selected unit applies
for all outputs
l FAD/s
l FAD/min
l FAD/h
l FAD/d
m³ FAD/s
m³ FAD/min
m³ FAD/h
m³ FAD/d
cf FAD/s
cf FAD/min
cf FAD/h cf FAD/d Country-dependent
• m³ FAD/h
• cf FAD/min
FAD volume unit Select the unit for
standard volume. l FAD
m³ FAD
cf FAD Country-dependent:
• m³ FAD
• cf FAD
Density unit Select the unit for density.
Result
The selected unit applies
for all outputs
g/cm³
kg/dm³
kg/l
kg/m³
lb/cf Country-dependent
• kg/m³
• lb/cf
Pressure unit Select the unit for process
pressure. kPa a
MPa a
bar a
psi a
mbar Country-dependent:
• bar a
• psi a
Temperature unit Select the unit for
temperature.
Result
The selected unit applies
for all outputs
°C
°F
K
°R Country-dependent:
• °C (Celsius)
• °F (Fahrenheit)
Length unit Select the unit of length
for the nominal diameter. mm
m
in
ft Country-dependent:
• mm
• in
10.5.4 Configuring the current output
In the Current output submenu, you can configure the values for the current output.