Endress+Hauser Proline t-mass A 150, Operating Instructions Manual, Page: 52 / 134

Commissioning Proline t-mass A 150 HART
52 Hauser
Measuring value at
maximum frequency Specify the measured
value at maximum
frequency. Depends on the process
variable selected -
Switch output function Select the function for the
switch output. • Off
• On
• Diagnostic behavior
• Limit value
• Status Off
Assign limit Select the process variable
for the limit function. • Mass flow
• Corrected volume flow
• FAD volume flow
• Temperature
• Totalizer Mass flow
Switch-off value Enter the measured value
for the switch-off value. Depends on the process
variable selected -
Switch-on value Enter the measured value
for the switch-on value. Depends on the process
variable selected -
Assign diagnostic
behavior Select the diagnostic
behavior for the switch
output. • Alarm
• Alarm or warning
• Warning Alarm
Assign status Select the device status for
the switch output. Low flow cut off Low flow cut off
Assign pulse output Select the process variable
for the pulse output. • Off
• Mass flow
• Corrected volume flow
• FAD volume flow Off
Pulse value Enter the measured value
for the pulse output. Depends on the process
variable selected -