Endress+Hauser Proline t-mass A 150, Operating Instructions Manual, Page: 46 / 134

System integration Proline t-mass A 150 HART
46 Hauser
9 System integration
9.1 Overview of device description files
9.1.1 Current version data for the device
Firmware version 01.00.zz • On the title page of the Operating instructions
• On transmitter nameplate→  12
• Parameter
firmware version
Diagnostics → Device info → Firmware version
Release date of firmware version 04.2012 ---
Manufacturer ID 0x11 Manufacturer ID parameter
Diagnostics → Device info→ Manufacturer ID
Device type ID 0x66 Device type parameter
Diagnostics → Device info → Device type
HART protocol revision 6.0 ---
Device revision 1 • On transmitter nameplate→  12
•
Device revision parameter
Diagnostics → Device info → Device revision
9.1.2 Operating tools
The suitable device description file for the individual operating tools is listed in the table
below, along with information on where the file can be acquired.
Operating tool via HART protocol Sources for obtaining device descriptions
Field Xpert SFX100 Use update function of handheld terminal
FieldCare • www.endress.com → Download Area
• CD–ROM (contact Hauser)
• DVD (contact Hauser)
AMS Device Manager
(Emerson Process Management) www.endress.com → Download Area
SIMATIC PDM
(Siemens) www.endress.com → Download Area
Field Communicator 375, 475
(Emerson Process Management) Use update function of handheld terminal
9.2 Measured variables via HART protocol
The following measured variables (HART device variables) are assigned to the dynamic
variables at the factory:
Dynamic variables Measured variables
(HART device variables)
Primary dynamic variable (PV) Mass flow
Secondary dynamic variable (SV) Totalizer
Tertiary dynamic variable (TV) Temperature
Quaternary dynamic variable (QV) Totalizer