SYSTEM UNITS
Proline t-mass 65 MODBUS RS485
10
Hauser
UNIT DENSITY
Description
For selecting the unit required and displayed for the calculated gas density at
process conditions. The unit you select here is also valid for:
• Reference density (see REFERENCE DENSITY group,
Options
SI:
0…1 = g/cm³; g/cc
2…4 = kg/dm³; kg/l; kg/m³
US:
11 = lb/ft³
Factory setting
kg/m³ or lb/ft³ (country dependent
55)
MODBUS register:
Data type:
Access:
2107
Integer
read/write
UNIT LENGTH
Prerequisite
This function is
only
available for the insertion sensor (t-mass 65I)
Description
For selecting the unit of length required and displayed for the pipe internal
diameter or the inner dimensions of rectangular ducts (see SENSOR DATA
function group
Options
0 = MILLIMETER
1 = INCH
Factory setting
MILLIMETER or INCH (country dependent
MODBUS register:
Data type:
Access:
2125
Integer
read/write
Function description, SYSTEM UNITS group
