Proline Promass E 100 Modbus RS485
Diagnostics and troubleshooting
Hauser
75
Information event
Event text
I1151
History reset
I1209
Density adjustment OK
I1221
Zero point adjust failure
I1222
Zero point adjustment OK
12.10 Resetting the measuring device
Using the
Device reset
parameter it is possible to reset the entire device configuration or
some of the configuration to a defined state.
Navigation path
"Diagnostics" menu → Device reset → Device reset
Function scope of the "Device reset" parameter
Options
Description
Cancel
The user exists the parameter and no action is performed.
To factory defaults
Every parameter is reset to its factory setting.
To delivery settings
Every parameter for which a customized default setting was ordered is reset to that
customized value; all other parameters are reset to their factory setting.
This option is not visible if no customized settings were ordered.
Restart device
Restarting the device resets every parameter whose data are saved in the volatile
memory (RAM) to the parameter's factory setting (e.g. measured value data). The
device configuration remains unchanged.
12.11 Device information
The
Device information
submenu contains all the parameters that display different
information for identifying the device.
Navigation path
"Diagnostics" menu → Device information
Structure of the submenu
Device information
→
Device tag
Serial number
Firmware version
Device name
Order code
Extended order code 1
Extended order code 2
Extended order code 3
ENP version
Summary of Contents for Proline Promass E 100
Page 107: ......
