Endress+Hauser Proline Promass 84F, Technical Information

Page: 32 / 72

Proline Promass 84F, 84M
32 Hauser
Promass F: Flange connections EN (DIN)
a0002501-en
Flange according to EN 1092-1 (DIN 2501 / DIN 2512N
1)
) / PN 16: 1.4404/316L
Surface roughness (flange): EN 1092-1 Form B1 (DIN 2526 Form C), Ra 3.2 to 12.5 μ m
DN G L N S LK U di
100 220 1128 8 × Ø 18 20 180 107.1 51.20
150 285 1330 8 × Ø 22 22 240 159.3 68.90
250
2)
405 1780 12 × Ø 26 26 355 260.4 102.26
All dimensions in [mm]; Further dimensions
→
Page 28 ff.
1)
flange with groove according to EN 1092-1 Form D (DIN 2512N) available
2)
not available in Alloy
Flange according to EN 1092-1 (DIN 2501 / DIN 2512N) extension - reduction / PN 16: 1.4404/316L
Only for nominal diameter DN 250 (on request)
Surface roughness (flange): Ra 0.8 to 3.2 μ m
DN G L N S LK U di
150 285 1980 8 × Ø 22 22 240 159.3 102.26
200 340 1940 12 × Ø 22 24 295 207.3 102.26
300 460 1940 12 × Ø 26 28 410 309.7 102.26
All dimensions in [mm]; Further dimensions
→
Page 28 ff.
Flange according to EN 1092-1 (DIN 2501 / DIN 2512N
1)
) / PN 40: 1.4404/316L, Alloy C-22
Surface roughness (flange): EN 1092-1 Form B1 (DIN 2526 Form C), Ra 3.2 to 12.5 μ m
DN G L N S LK U di
8
2)
95 370 4 × Ø 14 16 65 17.3 5.35
15 95 404 4 × Ø 14 16 65 17.3 8.30
25 115 440 4 × Ø 14 18 85 28.5 12.00
40 150 550 4 × Ø 18 18 110 43.1 17.60
50 165 715 4 × Ø 18 20 125 54.5 26.00
80 200 840 8 × Ø 18 24 160 82.5 40.50
100 235 1128 8 × Ø 22 24 190 107.1 51.20
150 300 1370 8 × Ø 26 28 250 159.3 68.90
250
3)
450 1850 12 × Ø 33 38 385 258.8 102.26
All dimensions in [mm]; Further dimensions
→
Page 28 ff.
1)
flange with groove according to EN 1092-1 Form D (DIN 2512N) available
2)
with DN 15 flanges;
3)
not available in Alloy
Esc
E - +
S
di
N
G
LK
U
+1.5*
–2.0*
L
*DN 150…250: ±3.5