Device Functions Proline Promag 55 FOUNDATION Fieldbus
1 Using the manual
Hauser
5
1
Using the manual
There are various ways of locating the description of a function of your choice in the manual:
1.1
Using the table of contents to locate a function
description
The designations of all the cells in the function matrix are listed in the table of contents. You can
use these unambiguous designations (such as USER INTERFACE, INPUTS, OUTPUTS, etc.) to
choose whichever functions are applicable to a particular set of conditions. The page references
show you exactly where to find the detailed descriptions of the functions in question. The table of
contents can be found on Page 3.
1.2
Using the graphic of the function matrix to locate a
function description
This step-by-step, top-down approach starts with the blocks, the highest level, and works down
through the matrix to the description of the function you need:
1.
All available blocks, and their corresponding groups, are illustrated on Page 8. Select the block
(or the group within the block) which you need for your application and use the page reference
to locate the information corresponding to the next level.
2.
The page in question contains a graphic showing of the block with all its subordinate groups,
function groups and functions. Select the function which you need for your application and use
the page reference to locate the detailed function description.
1.3
Using the index of the function matrix to locate a
function description
Each "cell" in the function matrix (blocks, groups, function groups, functions) has a unique identifier
in the form of a code consisting of one or three letters or a three- or four-digit number. The code
identifying a selected "cell" appears at the top right on the local display.
Example:
A0004750-EN
The function matrix index lists the codes for all the available "cells" in alphabetic and consecutive
order, complete with the page references for the corresponding functions. The index to the function
matrix is on Page 61.
