Technical data
Proline Promag 55 PROFIBUS PA
128
Hauser
Weight data of Promag H in US units [lbs = pounds]
Materials
Promag S
Transmitter housing:
• Compact and remote version: Powder-coated die-cast aluminum
Sensor housing:
• DN 15 to 300 (½ to 12"): Powder-coated die-cast aluminum
• DN 350 to 600 (14 to 24"): Painted steel (Amerlock 400)
Measuring tube:
• DN < 350 (14"): Stainless steel 1.4301 (SS 304) or 1.4306/304L. For flanges of carbon steel with
Al/Zn protective coating.
• DN > 300 (12"): Stainless steel 1.4301/304. For flanges of carbon steel with Amerlock 400 paint
finish.
Flange:
• EN 1092-1 (DIN 2501): 316L / 1.4571 (SS 316Ti); RSt37-2 (S235JRG2) / C22 / FE 410W B
(DN < 350/14": with Al/Zn protective coating; DN > 300/12" with Amerlock 400 paint finish)
• ANSI: A105; F316L
(DN < 350/14" with Al/Zn protective coating; DN > 300/12" with Amerlock 400 paint finish)
• JIS: RSt37-2 (S235JRG2) / HII / 1.0425 / 316L
(DN < 350 with Al/Zn protective coating; DN > 300/12" with Amerlock 400 paint finish)
• AS 2129:
– DN 25 (1"): A105 or RSt37-2 (S235JRG2), with Al/Zn protective coating
– DN 50 (2"): A105 or St44-2 (S275JR), with Al/Zn protective coating
• AS 4087:
– DN 50 (2"): A105 or St44-2 (S275JR), with Al/Zn protective coating
Ground disks: 1.4435/316L or Alloy C-22
Electrodes: 1.4435/316L, platinum/rhodium 80/20, Alloy C-22, tantalum, tungsten carbide
coating (for electrodes made from 1.4435), 1.4310/302 (for brush electrodes), Duplex 1.4462
Seals: according to DIN EN 1514-1
Weight of Promag H in pounds [lbs]
Nominal diameter
Compact version
Remote version (without cable)
Sensor
Transmitter
[mm]
[inch]
DIN
(Wall housing)
2
1/12"
11
6
13
4
5/32"
11
6
13
8
5/16"
12
6
13
15
½"
12
6
13
25
1"
12
6
13
40
1½"
14
10
13
50
2"
20
15
13
65
2½"
21
17
13
80
3"
42
37
13
100
4"
41
36
13
Transmitter (compact version): +7.5 lbs
(Weight data valid for standard pressure ratings and without packaging material)
