Endress+Hauser Proline Promag 50, Operating Instructions Manual

Page: 69 / 122

Promag 50 Operation
Hauser 69
8
3 359 Pulse output:
Flow is out of range.
4 360
5 361
6 362
10 7 401 Measuring tube partially filled or empty
11
2 461
EPD calibration not possible because the fluid's conductivity is either too low or too
high.
4 463
The EPD calibration values for empty pipe and full pipe are identical, and therefore
incorrect.
12
1 474 Maximum flow value entered is overshot
7 501 Amplifier software version is loaded. Currently no other commands are possible.
13 0 502 Upload/download of device files. Currently no other commands are possible.
14
3 601 Positive zero return active
7 611 Simulation current output active
15
0 612
1 613
2 614
3 621 Simulation frequency output active
4 622
5 623
6 624
7 631 Simulation pulse output active
16
0 632
1 633
2 634
3 641 Simulation status output active
4 642
5 643
6 644
17 7 671 Simulation of the status input active
18
0 672
1 673
2 674
3 691 Simulation of response to error (outputs) active
4 692 Simulation of volume flow active
Byte Bit Error No. Short error description